Ernestolone-Dac
LOW-Phono01-470×470
LOW-Phono03
LOW-Phono04

Carot One Ernestolone Dac

66,900 L

  • Only 75mm x 70mm x 110mm. • 25wpc + 25wpc @ 4 Ohms.
  • 18wpc + 18wpc @ 6 Ohms. • 12wpc + 12wpc @ 8 Ohms.
  • Front panel jacks for headphones and iPod/iPhoneMP3 inputs, input to line level input.l Selector Line/Phono.
  • Rear panel connections for LINE input, PHONO input and speaker outputs
  • High power allows for use with a wide variety of quality loudspeakers
  • Spectacular audio performance!
Kategori: , ,
Shihni shportën

Përshkrim

The Magic of ERNESTOLONE for your turntable
Tube integrated amplifier with Phono preamplifier. The tube preamplifier section is completely separate from the power amplifier section, Phono preamplifier MM—1 input Line and 1 input Phono

Informacion shtesë

Brand

Specifications

Specification of the Power Amplifier Unit
• Output Power 2x25W @4ohm 2x12W @8ohm(RMS)
• Signal-to-Noise Ratio (SNR) 98dB
• Dynamic Range 98dB
• THD+Noise Audiophile Quality 0.03% @ 9W 4Ohm
• 0.15% @ 8W 4Ohm
• 0.11% @ 6W 8Ohm
• High Power 10% @ 15W 4Ohm 10% @ 10W 4Ohm
• Input Audio IN RCA (Left/Right) x 1
• Power Socket 2.1mm x 1
• Speaker OUT Banana socket x4
• Other Volume & Knob Power ON/OFF switch x
• Power Indicator (Blue LED) x1
• Power Supply DC 12V-13.2V (max.)
Specification of the Headphone Amplifier Unit
• Signal-to-Noise Ratio (SNR) 92dB
• Power Output 600m Watts per channel on 32 Ohm
• Headphone
• Frequency response 15 Hz – 100 kHz -1db
• Input Impedance 10k Ohms
• Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]
Specification of the MM Phono Unit
• Sensitivity 0.35mV for 350mV Output at1KHz
• Input 47k Ohm
Specification of the Pre Amplifier Unit
• Vacuum Tube 6DJ8/6922 series or 12AU7 series (exchangeable)
• Signal-to-Noise Ratio (SNR) 92dB
• THD + Noise 0.05% @ 10k ohm 0.15% @ 33 ohm
• Input Audio CD IN RCA (Left/Right) x 1 [3Vpp max.]
• Output Audio OUT 3.5mm x 1
• Headphone OUT (3.5mm) x 1
• Knob Audio and power switch x 1
• Power Indicator (Blue LED under Tube Socket) x1
• Volume Knob x 1
• Power Supply DC 12V-13V (max.)
Specification of the AC Adaptor
• AC Input Universal AC 100V-240V/50-60Hz
• DC Output DC 12V 5A (60W)
• DC Plug DC 2.1mm
• Ripple & Noise <= 25mV
• Over-load Protection 105%-150%
• Over-voltage Protection 115%-150%
• Dimensions (L)78mm x (W)50mm x (H)33mm